4.9. Moving the RC Cage
Prev 4. Pre-Scan: MSR (Magnetically Shielded Room) Set Up Next

4.9. Moving the RC Cage

You will not have to move the RC cage during the set up period. However, before the recording begins, the RC cage must be moved as far away from the dewar as possible. The position changes depending upon the recording position. This will prevent any electrical contamination of the data that may be caused by the RC cage.

  1. To move the cage away from the dewar when recording in the seated position, slide the cage as close to the back of the rail as possible, see Figure 4.13.
  2. To move the cage towards the waveguide wall when recording in the supine position, slide the cage as close to the front of the rail as possible, see Figure 4.14.
Prev Up Next
4.8. Positioning the MEG Dewar Home 4.10. Participant Monitoring Inside the MSR